VETRO E

VETRO E

CONSTRUCTION

The leaf frame is made of MDF board, reinforced with plywood, filled with perforated chipboard. The filled frame is clad on both sides with HDF board covered with synchronous laminate. Tempered laminated DECORMAT glass, thickness 0.3″ with a fixed width (regardless of the leaf width) or black tempered laminated glass (non-transparent) 0.3″ with a fixed width (regardless of the leaf width).

TYPES OF WINGS

Non-rebated wing
  • Black non-rebated edge sockets for 2 concealed hinges Estetic 80 in black (hinges are included in the frame) Magnetic lock for regular key, bathroom lock, patent cylinder or economy lock in black We recommend a black door frame for the door leaf.

Sliding wing

  • Wall sliding system is designed for single or double-leaf interior doors in the sliding variant. It can be used for doors in our offer, in the following finishes: DRE-Cell, 3D foil, CPL laminates, natural veneers, as well as painted doors We offer two types of sliding systems:
    • NS – system mounted directly on the wall
    • NT – system installed with the use of a regulated tunnel

SPECIAL FEATURES

Frame construction

The door is built on the basis of a frame consisting of two horizontal and vertical rails, filled with internal panels, panels or glass. Made of MDF. The width of the vertical sill 6.3″.

Safety glass

Where safety matters, the material must be of the highest quality. 0.2″ or 0.3″ thick tempered glass guarantees quality and durability that you can be sure of.

TECHNICAL DATA

STANDARD
  • the leaf is painted with UV acrylic varnish
  • toughened laminated glass DECORMAT, thickness 8 mm with a fixed width (regardless of the leaf width) or black tempered laminated glass (non-transparent) 8 mm with a fixed width (regardless of the leaf width)
  • chipboard filling
  • frame made of MDF board reinforced with plywood
  • leaf plane covered with laminated, synchronous board, 0.1″ or 0.2″ thick

COLOR

 

 

WE OFFER ONLY THE FINEST PRODUCTS OF THESE COMPANIES:

wiked
porta
dre
delta